Check it out here:
I’m not sure if anyone else remembers the early days of OpenFlow and Software Defined Networking (SDN), but it was going to change networking for good. The idea was being able to embed programmable forwarding and filtering policy directly into your switches. You would then use a controller which spoke to the switches via the OpenFlow protocol to distribute network policy like you would find in firewalls & load balancers, right inside your switch. The problem was that OpenFlow had scalability issues, was tough to integrate with switch pipelines and just never saw the enterprise adoption that many expected. 10 years after the first drafts of OpenFlow, we are seeing some of the promise of SDN & OpenFlow’s key ideals back again for consumption in different forms.
Out with the DumbNICs, In with the SmartNICs
Some big names in the networking such as Broadcom, Mellanox & Xilinix are beginning to tout SmartNIC offerings which they have created at the behest of the cloud scaler crowd the likes of Amazon, Microsoft and Google. These organizations are looking ways to offload the network processing away from the general purpose CPUs which power their cloud offerings over to specialized SmartNICs that take it on. A nice side effect of putting the packet mojo into the SmartNIC is forwarding and policy capabilities outside of what a standard NIC can accomplish using Field Programmable Gate Arrays (FPGA) or SOC (system on a chip) to provide extended functionality. This makes for some interesting distributed policy and monitoring capabilities such as telemetry, encryption, filtering, stateful IPS/IDS, load balancing and compression right at the host side edge of the network. This is tremendously powerful in that it presents a lot of options for large operators by distributing and accelerating workloads while preserving the compute infrastructure for what it should be doing: computing.
A “SmartToR” Edge
Late last year, Broadcom announced their Trident based SmartToR offerings to take similar functionality you would find in SmartNICs to the Top of Rack (ToR) switch, the network side edge of the datacenter. This makes possible some of those same features in the SmartNIC and pushes them down to the network edge before the packets get to the hosts. Examples of potential applications could be for traffic you wish to manipulate before it actually gets to the hosts. So you can introduce load balancers to distribute inbound sessions, firewalls to stop DDoS from melting the hosts, Network Address Translation (NAT) to translate public to private addresses, penultimate decryption of traffic and all with switch Application Specific Integrated Circuits ASICs for blazing forwarding performance. Leveraging really fast switch ASICs to analyze and control traffic gives you orders of magnitude greater scale. Analysts believe that the SmartToR concept will be more suitable for enterprise versus the SmartNIC approach because of the preference for a “bare metal” appliance in enterprise environments.
What’s the deal with P4?
So after OpenFlow, a consortium of network luminaries including some of the smart people responsible for OpenFlow decided to try something new. Programming Protocol-independent Packet Processors (or P4 for short) was created with a different type of network architecture in mind. Instead of speaking to fixed-function switches who have locked in functionality baked right into their ASICs which OpenFlow leverages, P4 was meant to be a programming language used on a programmable chip (aka PISA or Protocol Independent Switch Architecture). The idea was instead of letting the switch chip makers dictate what features and functions were available, one could potentially write their own rules right into the switch for operation. Want write a custom IPv4 pipeline to support a specific need in your backbone? Go for it. Want to write your own Internet Protocol, IPv[Your Name Here]? Knock yourself out. It was a fully extensible and programmable chip so the sky was the limit. Though powerful, this is inaccessible for the average organization and wielded more deftly in the hands of cloud scale companies and network vendors. P4 is being leveraged to write some cool network applications, but has limited application in the enterprise.
So is SDN Coming Back?
SDN never really went away. Many cloud-scalers and academic networks continued on with their SDN efforts with and without OpenFlow long after the rest of the industry. The “one size fits all” approach of OpenFlow just was not a fit for most of the market but many of the basic tenets appear to live on in different forms. From the looks of trends like SmartNICs, P4 and switches the likes of Broadcom’s SmartTor, the idea lives on that you can embed many of today’s disparate edge network functions right into the network itself. Taking what has traditionally been separate network appliances scattered throughout the network and embedding them inline presents many advantages with regard to capacity, visibility and control. As with anything, it takes a few tries to get things right but the promise of a fully programmable network within which you can directly embed key network functions is too great to go away.
A lot of folks I speak with about Software Defined Wide Area Networking (SD-WAN) are trying hard to understand how this rapidly emerging technology works and the places where it can fit with their clients or within their own network. As we acquire more experience with deployments inside many different business and network environments, the results that we discover are quite surprising. There are many applications where SD-WAN is an obvious fit but in some cases, the true value is not exactly what we were expecting. The following are some of the more prominent examples of reasons for SD-WAN we’ve been able to assist with to date:
- Voice Services Over the Internet – A lot of small to medium sized businesses have started utilizing voice services over commodity broadband connections with no Quality of Service (QoS) in place. Though most of the time this works adequately, there will be many instances of degradation in quality or dropped calls that can be frustrating. This has just been the reality of utilizing the public Internet for voice services… up until now. With SD-WAN, we’re able to prioritize voice traffic both inbound and outbound while leveraging multi-path technologies to “route around” carrier backbone problems. We’re able to do this with single, stand alone sites in addition to multiple locations.
- WAN Visibility and Management – Setting aside the benefits of multi-path link steering, bandwidth aggregation and QoS for a bit, many organizations have no usage breakdowns or application performance visibility in their network today. As a byproduct of the application steering and prioritization baked into most SD-WAN solutions, there is a great deal of reporting functionality available. So now when stakeholders of IT want to know what is happening at their remote locations, they have a graphical interface to see exactly what is happening.
- Configuration Uniformity and Standardization – Large organizations which have many sites or will soon have many sites at the hands of rapid growth can have a lot of hands in the IT group working on things. With this, lack of standardization becomes an issue as sites are configured and turned up if there is not a uniform configuration policy. With SD-WAN, attaining a high level of uniformity is simple using features like Zero Touch provisioning and Configuration Profiles to make sure that all sites are configured identically. This also helps greatly for change management if you want to make a configuration update to all of your locations. With this approach, you can update a configuration in one place and push it to all sites, instantaneously. This frees up engineers to solve larger problems facing the business rather than making a minor configuration change on dozens or hundreds of sites.
- Remote Diagnostics Capabilities – When there are issues at a remote location, it can often times be difficult to walk users through providing troubleshooting assistance or getting the right software and hardware onsite. With the built in tools into many SD-WAN solutions, the ability to perform packet captures, see network state and what the users see on the network, so that the time vetting issues on the network can be greatly reduced.
- MPLS / IP VPN Replacement – MPLS and other dedicated private network infrastructures have begun to outlive their usefulness with many organizations as critical workloads are moved to the cloud. Further, there is growing demand by companies to reduce cost of their expensive WANs that typically have no redundancy or application smarts built in. SD-WAN can easily leverage existing dedicated internet access (DIA) links and even inexpensive broadband connections to build an application aware, private network overlay that provides more applications control, redundancy and critical business application prioritization than traditional network designs.
These are just five examples of things we have been able to help with. We’re happily conducting Proof of Concept deployments for businesses to show the value of SD-WAN and finding new use cases all the time. We find ourselves working on long standing problems that have been occurring for years in traditional networks and within just a few hours of having SD-WAN appliances in the network, fixing them. Using this technology is some of the most rewarding work I’ve ever done as a network engineer. SD-WAN really is a game changer!